四指剥边
Four fingers edge peeling
安装和操作容易，噪音小，动转平稳、可靠、使用 寿命长，对织物适应性强，配备探边、探头专用安装调节支架， 总体简洁，使用方便。
Easy to install and operate, low noise, smooth and reliable service life, strong adaptability to fabric, and the special Installation and adjustment bracket is provided for probe and edge probe, simple in the whole and easy to use delineation drilling.
主要技术参数 MAIN TECHNICAL PARAMETERS

工作电源：380V
电机功率：250W

Working Power supply : 380V
Motor power: 250W

不锈钢扩幅辑：Φ100mmx2支，绕丝Φ4mm或扁丝
扩幅电机功率：750W
红外光电控制系统：一套
对中校正驱动：气缸驱动，气压 3kgf/cm2
电源：三相380V AC 50Hz
装机容量：动态2.2KVA
适用门幅：1400-4000mm
对中精度：6mm以内
响应速度：0.5S
适应环境温度：-10℃-+50℃

Stainless steel spreading roll: Φ100mm × 2 rolls Wire winding Φ 4 mm or flat filament
Size enlarging motor power: 750W
Infrared photoelectric control system: One set
Centering correction drive: Cylinder drive, air pressure 3kgf/cm2
Power supply: three-phase 380V AC 50Hz
Installed capacity: dynamic 2.2KVA
Applied width of fabric: 1400-4000mm
Accuracy of alignment: Within 6mm
Response speed: 0.5S
Applicable environment temperature: -10°C- +50°C